The NZXT H210i is the successor of the H200i. Like its predecessors, the Mini-Tower offers a proven, no-frills design. The mounting mechanism of the tempered glass side panel has been optimized and now requires only one screw at the rear of the case. This gives a cleaner look and the glass is under less total tension. In addition, NZXT has installed a Smart Device V2 to control fans and RGB LED accessories and has also refreshed the front panel with new connectivity options.
THE FEATURES OF THE NZXT H210I-MINI-ITX PACKAGE AT A GLANCE:
Mini-ITX package from NZXT in black/red
Integrated controller for fan and RGB-LEDs
Two Aer F120 fans pre-installed
Large side window made of tempered glass
Includes addressable NZXT HUE 2 RGB-LED strip
Place for one 240 and one 120 radiator
Slots for up to three 2.5-inch drives and one 3.5-inch drive
NZXT H210I: MINI-ITX CASE WITH TEMPERED GLASS
NZXT has opted for the tried and tested shape of the H210i's predecesssor with smooth outer surfaces and attractive proportions. Changes in appearance are primarily of a practical nature: the tempered glass side panel of the predecessor was attached to the chassis with four knurled screws. On the NZXT H210i, on the other hand, the side surface is completely flat. A single thumbscrew on the back of the case provides a secure grip and easier access to the inside of the computer.
As a special feature the NZXT H210i mini tower has an integrated controller with NZXT CAM support, called the Smart Device V2. It is used to control the pre-installed NXZT Aer F fans and the NXZT HUE 2 RGB-LED strips included with the case, which are visible through the tempered glass window. A total of nine fans can be connected to the three PWM connectors via Y-cables. The RGB connectors together support four HUE 2 strips or up to five NZXT Aer RGB fans. An acoustic sensor helps to determine the optimum balance between cooling and noise. The system is controlled via the feature-rich software on the PC.
AIR AND WATER COOLING OPTIONS
If you rely on traditional air cooling, the NZXT H210i offers a lot despite its compact dimensions: At the front there is room for two 140 or 120 fans and in the roof as well as in the back wall there is room for one 120 mm fan each. For CPU coolers, a maximum height of 165 millimeters is provided. NZXT equips the Mini Tower as standard with in-house fans from the Aer series: A black 120 model is pre-installed in the cover and on the back. The fans ensure a plentiful supply of fresh air. Removable dust filters are mounted on the front and under the power supply unit.
The installation of a custom water cooling system was also taken into account: In front the user can install a 240 mm radiator. In addition, a 120 heat exchanger can be installed on the rear wall. In the front 85 millimetres of space are provided along with 42 millimetres on the rear wall. On the cable cover between motherboard and the front of the case, a reservoir and pump with up to 150 mm total height can be installed.
PLENTY OF SPACE FOR HARDWARE COMPONENTS
The interior of the NZXT H210i is limited, but well structured. Only Mini-ITX format motherboards can be used. Two slots are available for expansion cards. Graphics cards may be up to 325 millimeters long.
Like its predecessors, the NZXT H210i has no external drive bays. Internally, however, a quite large number of storage drives can be installed: Under the power supply cover a 3.5 inch hard disk can be installed in the bottom of the case. The holes are also suitable for a 2.5-inch drive should you prefer.
Behind the motherboard tray, there is space for two 2.5-inch drives mounted vertically and another 2.5-inch drive on the side of the motherboard tray. This makes it possible to mount up to four 2.5-inch drives or three 2.5-inch SSDs as well as a 3.5-inch hard disk. Behind the motherboard tray there are dedicated rails for cable routing. There is about 16.3 millimeters of space available for discretely stowing away unsightly cables.
Dimensions without feet: 210 x 334 x 372 mm (W x H x D)
Dimensions with feet: 210 x 349 x 372 mm (W x H x D)
Material: steel, tempered glass
Weight: 6 kg
Colour: Black (outer panels, chassis), Red (cable cover, trim)
Form factor: Mini-ITX
Fans possible in total:
2x 120 mm or 2x 140 mm (front side)
1x 120 mm (back side)
1x 120 mm (cover)
1x 120 mm Aer F120 (1200 RPM, 85.66 m³/h, 28 dB(A), Rear)
1x 120 mm Aer F120 (1200 RPM, 85.66 m³/h, 28 dB(A), Roof)
Filter: Front, bottom
1x 240 mm (front)
1x 120 mm (rear)
1x 3,5 / 2,5" (internal)
3x 2,5" (internal)
PSU: 1x Standard ATX / SFX (optional)
Expansion slots: 2
1x USB 3.0 Type A (USB 3.1 Gen 1, internal connection)
1x USB 3.1 Type C (USB 3.1 Gen 2, internal connection)
1x 3.5 mm jack (4-pin, TRRS, Audio In/Out)
Smart Device V2
3x 4-pin PWM (max. 10W per channel)
2x 4-pin RGB (NZXT HUE 2, proprietary)
1x USB 2.0 (9-pin, internal)
1x SATA current
Maximum CPU cooler height: 165 mm
Maximum length of the graphics card: 325 mm
Maximum power supply length: 311 mm
Maximum radiator depth:
Front: 85 mm
Rear: 42 mm
1x NZXT H210i
1x Set mounting screws
10x Cable ties
1x Headset adapter (1x 3.5 mm 4-pole to 2x 3.5 mm 3-pin)
Manufacturer warranty: 2 years
Choose how fast you receive your order with the multiple delivery methods we have to offer.Learn about our delivery options
Our main focus is to provide the best customer service possible to our community.We're here for you
Every time you make a purchase at shop4il.com we give you 2.5% of the price you paid back in Player PointsSee even more reasons
For 15 years we have been working our hardest to ensure that our customers and suppliers can trust us.Learn more about us
Want to know when NZXT H210i Mini-ITX RGB Gaming Case - Black/Red Tempered Glass drops below a certain price? Enter your email address and price below and we'll let you know when it drops below that price!
Why over half a million customers stay with us...
Please note that this address is not for correspondence or product returns. If you would like to contact us, please use the form on the contact page.